HomeProductsService ProductionФилософияLinksGuest bookContactForumReady products

 

 

 

 

 

Subwoofers

 

created to reproduce music together with the main loudspeakers, or as part of a home theater. For clear, well-articulated sound the particular attention is paid to uniformity of frequency response. We had to abandon the fashionable reduction of acoustic volume. It allowed us not only to improve AFR, but also to raise efficiency of driver use.

 

 

Enlarge
Enlarge

Enlarge

Enlarge

Enlarge
SW-1 beech veneer finish
SW-1 oak tree veneer finish
SW-1 bleached oak veneer finish

SW-1 light oak venee finish

[ bottom view ]

SW-1black piano lacquer finish

 

SW-1

subwoofer is designed for rooms up to 25 sq.m. and features one 10-inch driver.
The capacity of on-board amplifier: 100 W
Frequency response is:

(+\- 2 dB.): 40 to 160 Hz, at maximum pass-band of the filter.

and 30 - 50 Hz - at minimum pass-band of the filter.

 

Dimensions: 69 (H) x 32 (W) x 32 (D) cm.

Acoustic design: bass reflex.

 

Price:
Vinyl finish - 43890 rubles.

Veneer finish - 57981 rubles.

 

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering).

 

 

Attention, the products are made to order with 50% prepayment. The making  takes approximately two months.

Ready products  are by 20% more expensive. (Except special proposals from the section "Ready products " ).

SW-2

subwoofer is designed for premises up to 50 sq.m.,

with two 10-inch drivers.
The capacity of on-board amplifier: 200 W,
Frequency response:

- (+\- 2 dB.): 40 to 160 Hz, at maximum pass-band of filter

- 30 - 50 Hz - at minimum pass-band of filter.

 

Dimensions: 69 (H) x 64 (W) x 32 (D) cm.

Acoustic design: bass reflex.

 

Price:
Vinyl finish - 87780 rubles.

Veneer finish - 115962 rubles.

 

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering).

Enlarge

 

SW-2 в тонированном шпоне дуба

 

SW-2d

subwoofer is designed for premises up to 50 sq.m.
The model represents two subwoofer with dimensions, equal to SW-1.

Block of adjustment and amplifier are located in one of them. The second passive subwoofer is connected to the first through active acoustic cable.

Acoustical characteristics are similar to SW-2 model . Division into two parts eliminates the impression of unwieldiness and, in some cases, enable to find better location for the "halves", providing a more uniform radiation of bass.

The capacity of on-board amplifier: 200 W

Prices are similar to the prices for SW-2

 

 

SW-1S

Luxury option of SW-1 with extended bass.
The capacity of on-board amplifier: 100 W
Frequency response:

(+\- 2 dB.): 25 - 160 Hz, with a maximum pass-band of filter.

Dimensions: 75 (H) x 42 (W) x 34 (D) cm.

Acoustic design: bass reflex.

 

Price:
Vinyl finish - 72534 rubles.

Veneer finish - 92708 rubles.

 

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering).

 

 

Modern veneer finishing options, please look here.

 

Not all types of veneer are available. Please, choose several options, indicating priority, if there more than one option that is suitable for you.

Ready subs type of veneer may differ slightly from the photo link.

 

Our standard vinyl colours are: black, red, yellow (beech), brown. All options are with wood imitation.

 

The possibility of other finishing options like, for example,white glossy ( - image 1 - , - image 2 - , - image 3 - ) - please, discuss when  ordering.

Custom vinyl finish raises the price of loudspeaker by 20%

.

 

 

 

Enlarge
SW-1S walnut vinyl finish.

 

 

 

 

 

Attention, in connection with instability of the prices of materials and equipment elements , all prices are given approximately. The exact prices will be calculated by preparation of the order for products.

 

 

Copyright ©2003, Alexandr Klyachin

Made in Point Studio