HomeProductsService ProductionФилософияLinksGuest bookContactForumReady products

 

MODELS

 

- Museum of exclusive amplifiers>>>

- Мuseum of amplifiers >>>

- After-sales service >>>

- Аrchive page >>>


 

SB-1-15

 

Enlarge

Provides damping factor sufficient to  preserve the original fine-tuning of modern speakers made by different manufacturers. Before the creation of the SA-5 and SB-1-15, we had to warn our clients  that due to the low coefficient of damping most models of  tube amplifiers, including our own ones, are not guaranteed to produce the sound l as it was conceived by developers of modern loudspeakers.
The picture presents one of finishing options.

 

Output power -  2 x 100 W / 5 Ohms.
Tubes - EL34, 6Н15П .
Output tubes work in class AB, tetrode mode.
Setting of output tube bies is  automatic. (!not conventional bies, because it won`t work in AB class!).

 Input - 3 pairs of RCA connections.

 

Price - 102340 rubles.

 

 

 

 

 

SBA

 

 

EnlargeOutput power -  2 x 175 W / 5 Ohms.
Tubes - KT120, 12AX7, 6Н15П .
Output tubes work in class AB, tetrode mode.
Setting of output tube bies is  automatic. (!not conventional bies, because it won`t work in AB class!).

 Input - 3 pairs of RCA connections.

Enlarge

 

Price - 152740 rub.

 

 

 

 

 

 

 

 

Archive page >>>

ABOUT AMPLIFIERS

 

Mikhail Aleksandrovich Avdeev

 

Organizer of Klyachin`s laboratory.

 

Creator of amplifiers design and exterior

 

(story by Alexander Klyachin)

Until 1995, I was convinced that tube amplifiers were made by rogues with the purpose of cheating on naive audiophiles. It was rather strange, because in 1986 I was in the technical crew that supported performances and song recordingsof the rock group "Apartment 50" and was convinced of the superiority of powerful tube amps over the transistor ones. Apparently my "righteous anger" was directed to domestic tube amplifiers, most of which presents a single-ended "weaklings" with 5 ... 10 Watts per channel, which react violently to any overload and continue to "cough" for some time, making the impression of even less power than they actually have. The matter is that since 1993 the "Natural" loudspekers ("Natural" was a name of a small company, established by me and YuryGribanov) were sold well. These speakers were fine-tuned for transistor amplifiers and for omni-directional sound were fitted out with 4, 6, and sometimes up to 18 tweeters! Such a huge heap of speakers consumed large amounts of electric power. Impedance at HF range fell below 2 Ohms! At medium and low frequencies the radiation of drivers were united and there was no need to connect them in parallel, (to increase volume) therefore, apart from treble those loudspeakers had sufficiently high resistance. Buttube amplifiers do not provide correct frequency response with speakers if these speakers are fine-tuned to match transistor amps and, furthermore, they have drops of resistance in specific frequency ranges. It’s clear whywith tube amplifiers my speakers of those years didn`t sound the way I wanted. Sure thing, I quickly found that "guilty" there were "bad" amplifiers. Dislike of mine was so great that at the first exhibition "Russian High - End 95", where I was one of the organizers, I made a secret attempt to discredit amplifiers. After a demonstration of some tube amplifiers made by Russian inventors, I announced (as if without a back thought) that we were going to connect a transistor amp. I was confident in the superiority of the latter. All turned out exactly the "opposite": - decent transistor amplifier sounded awfully after the tube one: - lifelessly, synthetically, dirtily. This edifying lesson made me resolutely abandon the prejudice and I fervently began to develop my own tube amplifiers. I was lucky, my first model with 6П44 tubes sounded well, from what I made a false conclusion that I already knew how to create good tube amplifiers.
Encouraged, I developed the following "advanced" model, with such a low level of noise and background, that nobody believed, leaning their ear to the speaker that the amplifier is already running, only the loud music hitting their ears was making them believe me. Noise was absent, but good sound was absent too. Here I realized, what a long way of knowledge was ahead of me. Persistence is my friend, so, already in 1996 I created a transformerless tube amplifier (OTL), in which between output tubes and loudspeakers there weren`t any output transformers and the sound therefore was much more alive and natural.
In 1997, a mighty OTL amplifier was born. It had a form of two monoblocks and preamplifier. Capacity reached 160 Watts per channel. For OTL amplifiers, which are remarkable for their low efficiency, 160 Watt is an enormous power!?In 1996, the first small-scale production of amplifiers with EL34 tubes was launched. My first amplifiers with 6С33С tubes appeared already in 1995, with 6П3С tubes - in 1999.
From year to year, I have perfected all these types of amplifiers, mastering the difficult art of creating models that are able to reproduce music, full of life, not just lifeless, clean sounds. A huge role in the implementation of my studies was played by my colleague and friend Mikhail AleksandrovichAvdeev, who had produced amplifiers before I realized the need for them in a good audio system. Mikhail have developed a beautiful appearance, design of cabinets and organized the manufacturing of amplifiers designed by me. I am grateful to him because I always can count on his effective organizational and intellectual assistance - he is the excellent designer and just a wise man.

 


 

Enlarge

Standard finishing options for the  front baffles of  ZKI open amplifiers since 1 of september 2011.

Other finishing options are possible, but some of them may cost more.

 

 

 

 

 

Attention, the products are made to order with 50% prepayment. The making  takes approximately two months.

Ready products  are by 20% more expensive. (Except special proposals from the section "Ready products " ).

 

 

Attention, in connection with instability of the prices of materials and equipment elements , all prices are given approximately. The exact prices will be calculated by preparation of the order for products.

 

Copyright ©2003, Alexandr Klyachin

Made in Point Studio