- Museum >>>

- M-2018 >>>

Powerful compact monitors with Alphard (LF 8 inches) drivers,

Broadband tweeters and midrange drivers are made in Russia and also used in our L-1, Y-1 and M-2011 models.

Only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, CA, SBA, SA-5, SB-1.

Every instance of speakers is tuned in Moscow to get the perfect music transmission.

Sensitivity 87 dB\W\m
Nameplate capacity - 80 watts.
Frequency response (+\- 2 dB) - 45 - 16000 Hz.
Impedance: 5 Ohm
Dimensions - 440 (H) x 236 (W) x 303 (D) mm.

Price:

Vinyl finish - 163800 rubles.

Veneer finish - 209000 rubles.

Powerful compact monitors with Alphard (LF 8 inches) drivers,

Broadband tweeters and midrange drivers are made in Russia and also used in our L-1, Y-1 and M-2011 models.

Only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, CA, SBA, SA-5, SB-1.

Every instance of speakers is tuned in Moscow to get the perfect music transmission.

Sensitivity 87 dB\W\m
Nameplate capacity - 80 watts.
Frequency response (+\- 2 dB) - 60 - 16000 Hz.
Impedance: 5 Ohm
Dimensions - 440 (H) x 236 (W) x 303 (D) mm.

Price:

Vinyl finish - 151000 rubles.

Veneer finish - 196300 rubles.

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering)

Stands are optional.

Attention, the sound settings of our monitors are extremely precise. Therefore, metal stands cannot be used - they affect the inductance coils of the acoustic system filters.

Necessary height of stands - 63 cm.

Price:

Vinyl finish - 44000 rubles.

Veneer finish - 69500 rubles.

M-2022, "nut" vinyl	M-2022, "beech" vinyl

Rules for connecting amplifiers to terminals M-2022(the same as for M-2018)

Modern veneer finishing options, please see here.

Not all types of veneer are available.

Please, choose several options, indicating priority, if there more than one option that is suitable for you.

On the final speaker type of veneer may differ slightly from the photo link.

Our standard vinyl finishes are black, red, yellow (beech), brown.
All with wood imitation.

The possibility of other finishing options like, for example,white glossy (image 1 , image 2 , image 3 ) - please, discuss when ordering.

Custom vinyl finish raises the price of loudspeaker by 20%

Attention, the products are made to order with 50% prepayment. The making  takes approximately two months.

Ready products  are by 20% more expensive. (Except special proposals from the section "Ready products " ).

.